Bronkhorst®
Instruction Manual EL-PRESS™
9.17.101I
18
2.8.3
E-8000 power supply, readout and control
Using an E-8000 module, instruments can be
powered (100…240 Vac) and operated via RS-
232. Most digital parameters and functions are
accessible via the display interface and the
control buttons.
This example uses the following components:
·
2x EL-PRESS™
·
2x RS-232/power supply cable (art no.
7.03.016/7.03.538/7.03.539)
·
E-8000 power supply, readout and control
module
Consult the
E-8000 manual
(document 9.17.076) for more information. This manual can be downloaded from the
Accessories and software
section on the Bronkhorst® product pages (
).
2.8.4
BRIGHT readout and control
Most digital parameters and functions are
accessible via the display interface and control
buttons of a BRIGHT readout and control
module (type B1 or B2). When a BRIGHT module
is installed, no other RS-232 connection can be
established with the instrument.
This example uses the following components:
·
EL-PRESS™
·
BRIGHT readout and control module
·
Plug-in Power Supply (PiPS, art no. 7.03.422)
Use the 9-pin D-sub connector on the side of the instrument to plug in the T-part that comes with the BRIGHT module.
Consult the
BRIGHT manual
(document 9.17.048) for more information. This manual can be downloaded from the
Accessories and software
section on the Bronkhorst® product pages (
).
