BRONKHORST EL-PRESS Metal sealed Скачать руководство пользователя

Страница: 17 / 45

Bronkhorst®

Instruction Manual EL-PRESS™

9.17.101I

2.8.1

RS232 communication

Using a Windows computer, the instrument can

be monitored and operated via RS-232. For

operation, the free Bronkhorst FlowWare tools

can be used, providing a comprehensive user

interface to the digital instrument functions.

This example uses the following components:

EL-PRESS™

RS-232 T-part cable (art no. 7.03.366)

RS-232-USB converter (art no. 9.09.122)

Windows computer (for readout and control)

Plug-in Power Supply (PiPS, art no. 7.03.422)

Connect the T-part cable with the 9-pin D-sub connector on the side of the instrument and use the RS-232/USB converter to

connect the other end of the cable with a free USB port of the computer.

For communication with a

PLC or other

controlling device, a 9-pin D-sub cable with a loose end (part no. 7.03.004,

7.03.536 or 7.03.537) can be used. Consult the

RS-232 hook-up diagram

to connect the required signals.

For RS-232 communication at baud rates up to 38400 Baud the maximum allowable cable length is 10 m. For higher

baud rates, use a maximum cable length of 3 m.

For more information about communication through the RS-232 interface, consult the

RS-232 manual

(document

no. 9.17.027).

The FlowWare tools and accompanying documentation can be downloaded from the

Accessories and software

section on the Bronkhorst® product pages (

www.bronkhorst.com/products

2.8.2

Fieldbus communication

The instrument can be connected to a fieldbus

system with the optional fieldbus connector on

top. At the same time, RS-232 communication

with a Windows computer is possible through

the 9-pin D-sub connector on the side of the

instrument.

This example uses the following components:

EL-PRESS™ with DeviceNet™ interface

DeviceNet™ M12 cable (art no. 7.03.323)

DeviceNet™ M12 Y adapter (art no. 7.03.319)

RS-232 cable (art no. 7.03.367)

RS-232-USB converter (art no. 9.09.122)

Windows computer (for readout and control)

Note that the used fieldbus components in this

example are specific to DeviceNet™. For connecting with other fieldbus systems, other cables and adapters are needed.

Always check the total power consumption of your instruments before connecting them to a fieldbus system. Do not exceed

the maximum power of the power supply unit.

For all available fieldbus types except PROFIBUS DP, the fieldbus connection on is used to power and operate the

instrument. For PROFIBUS DP, the instrument needs to be powered through the 9-pin D-sub connector on the side of the

instrument as shown in

RS232 communication

Consult the according

fieldbus manual

for more information about setting up a fieldbus network with Bronkhorst®

instruments.

If you need assistance with setting up a fieldbus system, contactyour Bronkhorst representative for information.

Содержание EL-PRESS Metal sealed














































Результаты поиска

Содержание EL-PRESS Metal sealed

Отзывы:

Похожие инструкции для EL-PRESS Metal sealed

Бренды по названию

Популярные бренды

BRONKHORST EL-PRESS Metal sealed, Инструкция по эксплуатации

Результаты поиска

Содержание EL-PRESS Metal sealed

Отзывы:

Похожие инструкции для EL-PRESS Metal sealed

Бренды по названию

Популярные бренды