brondell 1018505, Руководство пользователя

Страница: 8 / 92

6
This product should only be used with a grounded GFCI
(Ground Fault Circuit Interrupter) outlet and a grounded
three-prong electrical cord as shown to the right. In the
event of an electrical short circuit, using a grounded GFCI
outlet reduces the risk of electric shock.
This product is equipped with a grounded cord and is for
use on a nominal 120V circuit only (minimum 15 amps) and
must be plugged into an outlet that is properly grounded
with a GFCI breaker as shown. Replace or repair a
damaged cord immediately.
Extension Cord
If it is necessary to use an extension cord, use only a three-wire extension cord with a three-
blade grounding plug, and a three-slot receptacle that will accept the plug of the product.
Replace or repair a damaged cord immediately.
GROUNDING AND GFI OUTLET INSTRUCTIONS
Test
Reset
Ground GFCI Outlet
Grounding Pin
Improper use of the grounding plug can result in a risk of electric shock.
• If repair or replacement of the cord or plug is necessary, do not connect
the grounding wire to either flat blade terminal. The wire with green
insulation (either with or without a yellow stripe) is the grounding wire.
• Check with a qualified electrician if the grounding instructions are not
completely understood, or if there is doubt if the product is properly
grounded.
SAFETY INFORMATION – cont.
(IMPORTANT SAFEGUARDS)
SAVE THESE INSTRUCTIONS