brondell 1018505, Руководство пользователя

Страница: 14 / 92

12
PRODUCT INSTALLATION (cont.)
SWASH INSTALLATION (cont.)
3. Connect T-Valve to Water Supply Line and Toilet Tank
a. Install the T-Valve with the rubber washer to the
incoming water connection on the bottom of your
toilet tank. Be sure that you place the flat edge of
the rubber washer into the T-Valve against the metal
with the raised lip facing the toilet tank connection.
b. Connect the water supply line coming from the wall
to the bottom of the T-Valve.
4. Connect Bidet Hose to T-Valve
a. Connect one end of the bidet hose to the T-Valve
and set aside.
5. Install Mounting Plate & Attach Swash
a. Place adjustable mounting plate over mounting
holes on toilet, flat side down, black rubber side of
mounting plate should be closest to the toilet tank
and rubber should be against the ceramic.
b. Place adjustable brackets flat side down in the
center of the square opening in the mounting
plate and insert mounting bolts through adjustable
brackets and mounting holes. Be sure that the
square mounting bolt head is even with sides of
adjustable bracket.
c. Slide rubber cone washer, flat washer, and then
barrel nut onto mounting bolts under the toilet bowl
and tighten to keep mounting plate in place.
Notes: The T-Valve connects to the fill valve directly
under your toilet tank - it does not connect at
the wall.
Only connect to the cold toilet water supply
line.
If your water supply line is rigid you may need
to replace it before continuing.
Steps 5b & 5c
Steps 3a & 3b