Comfort-Tilt
16
SECTION 4 - WHEELCHAIR OPERATION
4.1
Armrests
The armrests are height adjustable and removable to accommodate various users and
facilitate transfers and access to the user.
Armrests Removal and Installation
1. Push-in the Arm Detent Pins.
2. Once the Arm Detent Pins are disengaged, remove the Front and Rear Frame Insert by
lifting the arm up.
3. To reinstall, insert the Back Frame Insert into the frame and then insert the Front Frame
Insert into the frame. Push in front and rear Arm Detent Pins to secure arm in place.
Adjusting the Armrest Height
1. Squeeze the Arm Height Adjustment Pins together.
2. Raise or lower the arm top to the desired height.
Release the pins and push down until the pins lock.
Note:
Do not place fingers directly under the arm or at the top
of the arm pins as this can cause pinching.
Replacing the Armrest Tops
1. Using a Phillips screwdriver loosen the 2 screws under the Arm Top.
2. Remove the Arm Top and place the new Arm Top on frame.
3. Screw the new Arm Top in place
Arm Height
Adjustment Pins
Arm Detent Pin
