About This Manual
BROCK® MEYER® Walkways and Ladders
4
MFH1968-5B
The intent of this Manual is to help you follow step-by-step instructions for plumbing
installations in the BROCK® MEYER® Dryer.
IMPORTANT!
Pay particular attention to all SAFETY Information in this Manual.
CAUTION!
Read and understand this Manual. Failure to follow proper procedures may
cause damage to equipment or personal injury.
Contact your Brock Dealer to replace this Manual should it become lost or damaged.
Store it in a convenient place for easy reference.
Definition of Terms and Symbols
• This
Planning
Symbol is used in areas where planning needs to take place
before
assembly and/or installation can continue.
•
“Horizontal,” “vertical,” “bottom,” and “top” refer to the Dryer as it is
standing
.
The symbols ('') equal
inches
and (') equals
feet
in English measurements.
Measurements
The symbols ('') equals inches and (') equals feet in English measurements.
Metric measurements are shown in square brackets
following
the English
measurement. For example: 15'
[4.572 m]
90'
[27.432 m]
Identification of Parts and Hardware
• Names for some components which have BROCK® Part Numbers have been
capi-
talized
throughout this Manual to
call attention
to them.
• Parts and basic components are identified in
Figures
and their accompanying Tables
as “Items” with a black number in white circle. See
Figure 1
below.
• Hardware is identified by a shaded circle and table item cell.
• Dimensions and lengths are noted with a white circle
on
an arrow or line, then identi-
fied with numeric values in a
Figure
Table.
•
Pictures may vary slightly from actual components, which may have been modi-
fied for better fit or function.
Hardware Basics:
Organize all hardware so the packages and buckets are easy to locate. When leaving
for the day, remember where you are in the installation, which connections are tight,
and which connections are loose.
IMPORTANT!
Always have a second person check the tightening on all Ladder and
Walkway connections!
This
Pre-Assemble Symbol
(left) suggests that a particular assembly can be
finished
ahead of time
. Plan to
sub-assemble
and add hardware any parts that can be prior to
installation. Make sure to use proper hardware.
About This Manual
Figure 1.
Part and Hardware Identification
6
8
32
38
43
Item Part No. Description
6
U-24016 Ladder Cap
8
U-24142 Extension Rail 54''
[1 372]
32
39-20152 Nut, Flange 5/16''-18
38
39-20101 Washer, Flat 5/16 x 1 1/4''
43
39-20322 Bolt, Hex Head 5/16-18 x
1 1/4'' Gr. 5
