Installations While the Tower Is on the Tower Trailer
BROCK® MEYER® Walkways and Ladders
8
MFH1968-5B
Attach the Walkway Arms, twelve (12) per Full Walkway, to the pre-installed Arm
Brackets with three (3) 3/8 x 1'' galvanized Hex Head Bolts. Secure with Flange Nuts.
Continue installing Arms around the Tower. Remaining Arms must be installed after
the Tower is raised to vertical.
All Arms must remain loose until all Walkway Floor Sections are attached.
Figure 9.
Install Walkway Arms
Walkway/”Catwalk” Arms
Consecutive Walkway Arms are bolted into the eleventh and twelfth (11th/12th)
bolt holes from the first set of bolts. There are ten (10) holes between Arms.