Brocade Communications Systems MLX Series, Руководство по установке

Страница: 96 / 326

82 Brocade MLX Series and Brocade NetIron XMR Installation Guide
53-1004195-02
Installing a Brocade MLX-32 router
DRAFT: BROCADE CONFIDENTIAL
Unpacking a Brocade MLX-32 router
The Brocade MLX-32 router ships with the following items:
•
Brocade MLX-32 router chassis with the empty slots covered with upper and lower shipping panels. The router is housed in a
wooden shipping crate that is strapped to a pallet.
•
The appropriate number of interface modules, switch fabric modules, management modules, and power supplies in separate
shipping cartons.
•
32 slot blanks in separate shipping carton.
•
Insertion or extraction tool for use with RJ45 and fiber-optic connectors.
If any of these items are missing, contact the place of purchase.
Removing the Brocade MLX-32 router from the shipping crate
The Brocade MLX-32 router ships in a wooden crate that is bolted to a wooden platform that rests on a pallet.You will need the following
tools to remove the router from the shipping crate:
•
A forklift or pallet jack with a minimum limit of 550 lbs to move the router crate on the pallet.
•
A mechanical lift with a minimum 350 lb limit to move the router off the pallet. The ideal lift configuration is a counterweight base
material lift with a metal lift plate installed in place of the forks. The metal plate should be no wider than 17 inches, so that it will fit
between the rack mount rails.
•
A strap to stabilize the router while you are moving it on the mechanical lift.
•
A power drill with the following attachments:
-
Large Phillips screwdriver
-
Large flat-blade screwdriver
-
7/16-inch socket wrench
1. The router shipping crate must be in the upright position with enough space to slide the crate off of the pallet.
2. Use a power drill with Phillips and large flat-blade screwdriver attachments to remove the bolts and screws that hold the front
shipping crate panel in place, as shown in
Figure 60 . Remove the front panel and set it aside.