Brocade FastIron Edge X-Series Hardware Installation Guide
19
Part Number: 53-1002499-02
Product Overview
Hardware features
Port regions
Ports on the FastIron compact switches are grouped into regions. For a few features, such as port monitoring and unknown unicast
configurations, you will need to know the region to which a port belongs. However, for most features, a port’s region does not affect
configuration or operation of the feature. If a port’s region does affect configuration or operation of a feature, it is noted and described in
the appropriate feature section of this guide.
FastIron X Series compact switches with 24 ports:
•
Ports 1 – 12
•
Ports 13 – 24
•
Port 25 (optional 10-GbE uplink port)
•
Port 26 (optional 10-GbE uplink port)
FastIron X Series compact switches with 48 ports:
•
Ports 1 – 12
10/100/1000 Fiber Port LEDs
Lnk
Bottom left
On
The fiber port is connected.
Off
No fiber port connection exists.
Act
Bottom right
On or blinking
Traffic is being transmitted and received
on the fiber port.
Off
No traffic is being transmitted on the fiber
port.
100/1000 Fiber Port LEDs on the FESX424HF, FESX624HF, and FESX624HFE-PREM6
Left for upper copper
Right for lower copper connector
On
The link is up.
Off
The link is down.
Blinking
The port is transmitting or receiving traffic
10-Gbps
Port LEDs
Lnk
Top right for left-most connector
Top left for right-most connector
On
The port is connected.
Off
No fiber port connection exists.
Act
Bottom right for left-most
connector
Bottom left for right-most
connector
On or Blinking
Traffic is being transmitted and received
on the fiber port.
Off
No traffic is being transmitted on the fiber
port.
POE Port LEDs
POE
Left for upper port
Right for lower port
On (Green)
The port is enabled, a power-consuming
device has been detected, and the module
is supplying power to the device.
Off
The port is not providing in-line power.
TABLE 2
LEDs for FastIron X Series ports (Continued)
LED
Position
State
Meaning
