Brocade Communications Systems FastIron SX 1600, Руководство по настройке, Страница: 547 / 593

TABLE 106 Output description for VRRP-E detailed information (continued)
Field Description
current priority The current VRRP, VRRP v3, VRRP-E, or IPv6 VRRP-E priority of this
Layer 3 switch for the VRID. The current priority can differ from the
configured priority (refer to the priority field) for the following reason:
The current priority can differ from the configured priority in the VRID if
the VRID is configured with track ports and the link on a tracked interface
has gone down.
hello-interval The configured value for the Hello interval. This is the amount of time, in
milliseconds, between Hello messages from the Master to the Backups
for a given VRID.
NOTE
In some VRRP command outputs, Hello interval timers are
displayed in seconds instead of milliseconds.
dead interval The configured value for the dead interval. This is the amount of time, in
milliseconds, that a Backup waits for a Hello message from the Master for
the VRID before determining that the Master is no longer active.
If the Master does not send a Hello message before the dead interval
expires, the Backups negotiate (compare priorities) to select a new Master
for the VRID.
NOTE
If the value is 0, then you have not configured this
parameter.
NOTE
This field does not apply to VRRP
Owners.
NOTE
All timer fields (Hello interval, dead interval, current dead
interval, and so on) are displayed in milliseconds.
current dead interval The current value of the dead interval. This value is equal to the value
configured for the dead interval.
If the value for the dead interval is not configured, then the current dead
interval is equal to three times the Hello interval plus Skew time (where
Skew time is equal to 256 minus priority divided by 256).
NOTE
This field does not apply to VRRP
Owners.
preempt mode Whether the backup preempt mode is enabled.
NOTE
This field does not apply to VRRP
Owners.
virtual ip address The virtual IP addresses that this VRID is backing up. The address can be
an IPv4 or IPv6 address.
virtual mac address The virtual MAC addresses for the VRID. The MAC address can be an
IPv4 or IPv6 address.
advertise backup The IP addresses of Backups that have advertised themselves to this
Layer 3 switch by sending Hello messages.
Displaying VRRP and VRRP-E information
FastIron Ethernet Switch Layer 3 Routing
53-1003627-04 547