manualshive.com logo in svg

Brocade Communications Systems FastIron SX 1600, Руководство по настройке, Страница: 345 / 593

Поделиться
Скачать
Brocade Communications Systems FastIron SX 1600 Скачать руководство пользователя страница 345

TABLE 88 

show ipv6 ospf interface output descriptions 

This field

Displays

Authentication

This field shows whether or not authentication is configured. If this field
says "Not Configured," the IPsec-related fields (bold in example screen
output) are not displayed at all.

KeyRolloverTime

The number of seconds between each initiation of a key rollover. This field
shows the configured and current times.

KeyRolloverState

Can be:

Not active: key rollover is not active.

Active phase 1: rollover is in its first interval.

Active phase 2: rollover is in its second interval.

Current

Shows current SPI, authentication algorithm (currently ESP only),
encryption algorithm (currently SHA1 only), and the current key.

New (Inbound or Outbound)

Shows new SPI (if changed), authentication algorithm (currently ESP only),
encryption algorithm (currently SHA1 only), and the new key.

Old (Inbound or Outbound)

Shows old SPI (if changed), authentication algorithm (currently ESP only),
encryption algorithm (currently SHA1 only), and the old key.

OSPF messages dropped

Shows the number of packets dropped because the packets failed
authentication (for any reason).

Displaying IPsec for a virtual link

To display IPsec for a virtual link, run the 

show ipv6 ospf virtual-link brief

 or 

show ipv6 ospf virtual-link

 command, as the following

examples illustrate.

device# show ipv6 ospf virtual-link brief

Index Transit Area ID  Router ID        Interface Address       State

1     1                10.14.14.14      2001:db8::1:1:1::1      P2P

device# show ipv6 ospf virtual-link

Transit Area ID  Router ID        Interface Address             State

1                10.14.14.14      2001:db8:1:1:1::1             P2P

  Timer intervals(sec) :

    Hello 10, Hello Jitter 10,  Dead 40, Retransmit 5, TransmitDelay 1

  DelayedLSAck:     5 times

  Authentication: Configured

   KeyRolloverTime(sec): Configured: 10 Current: 0

   KeyRolloverState: NotActive

   Outbound: SPI:100004, ESP, SHA1

      Key:1234567890123456789012345678901234567890

   Inbound: SPI:100004, ESP, SHA1

      Key:1234567890123456789012345678901234567890

  Statistics:

      Type     tx         rx         tx-byte    rx-byte

      Unknown  0          0          0          0         

      Hello    65         65         2600       2596     

      DbDesc   4          4          2752       2992      

      LSReq    1          1          232        64        

      LSUpdate 11         5          1040       1112     

      LSAck    5          8          560        448       

      OSPF messages dropped,no authentication: 0

Neighbor: State: Full Address: 2001:db8:44:44::4 Interface: eth 1/2/2

Syntax:

 

show ipv6 ospf virtual-link 

[

brief

]

The optional 

brief

 keyword limits the display to the Transit, Area ID, Router ID, Interface Address, and State fields for each link.

Displaying OSPFv3 information

FastIron Ethernet Switch Layer 3 Routing

53-1003627-04

345

Содержание FastIron SX 1600


















































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов