manualshive.com logo in svg

Brocade Communications Systems FastIron SX 1600, Руководство по настройке, Страница: 394 / 593

Поделиться
Скачать
Brocade Communications Systems FastIron SX 1600 Скачать руководство пользователя страница 394

deviceB(config-bgp-router)# confederation identifier 10

deviceB(config-bgp-router)# confederation peers 64512 64513

deviceB(config-bgp-router)# write memory

Commands for device C

deviceC(config)# router bgp

deviceC(config-bgp-router)# local-as 64513

deviceC(config-bgp-router)# confederation identifier 10

deviceC(config-bgp-router)# confederation peers 64512 64513

deviceC(config-bgp-router)# write memory

Commands for device D

deviceD(config)# router bgp

deviceD(config-bgp-router)# local-as 64513

deviceD(config-bgp-router)# confederation identifier 10

deviceD(config-bgp-router)# confederation peers 64512 64513

deviceD(config-bgp-router)# write memory

Aggregating routes advertised to BGP4 neighbors

By default, the device advertises individual routes for all networks. The aggregation feature allows you to configure the device to
aggregate routes from a range of networks into a single network prefix. For example, without aggregation, the device will individually
advertise routes for networks 10.95.1.0/24, 10.95.2.0/24, and 10.95.3.0/24. You can configure the device to end a single, aggregate
route for the networks instead. The aggregate route can be advertised as 10.95.0.0/16.

To aggregate routes for 10.157.22.0/24, 10.157.23.0/24, and 10.157.24.0/24, enter the following command.

device(config-bgp)# aggregate-address 10.157.0.0 255.255.0.0

Syntax:

 

[no] aggregate-address

 

ip-addr

 

ip-mask

 [ 

as-set

 ] [ 

summary-only

 ] [ 

suppress-map

 

map-name

 ] [ 

advertise-map

 

map-

name

 ] [ 

attribute-map

 

map-name

 ]

The 

ip-addr

 and 

ip-mask

 parameters specify the aggregate value for the networks. Specify 0 for the host portion and for the network

portion that differs among the networks in the aggregate. For example, to aggregate 10.0.1.0/24, 10.0.2.0/24, and 10.0.3.0/24, enter
the IP address 10.0.0.0 and the network mask 255.255.0.0.

The 

as-set 

parameter causes the device to aggregate AS-path information for all the routes in the aggregate address into a single AS-

path.

The 

summary-only 

parameter prevents the device from advertising more specific routes contained within the aggregate route.

The 

suppress-map 

map-name

 parameter prevents the more specific routes contained in the specified route map from being advertised.

The 

advertise-map 

map-name 

parameter configures the device to advertise the more specific routes in the specified route map.

The 

attribute-map 

map-name

 parameter configures the device to set attributes for the aggregate routes based on the specified route

map.

NOTE

For the 

suppress-map

 , 

advertise-map

 , and 

attribute-map

 parameters, the route map must already be

defined.

Optional BGP4 configuration tasks

FastIron Ethernet Switch Layer 3 Routing

394

53-1003627-04

Содержание FastIron SX 1600


















































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов