Brocade Communications Systems Fabric Watch Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 126

background image

Fabric Watch Administrator’s Guide

9

53-1002752-01

Fabric Watch event settings

1

MIB capability configuration parameters

The mibCapability option turns certain MIBs and associated SNMP traps on or off. If a specific MIB
is disabled, the corresponding traps are also disabled. If any trap group is disabled, the
corresponding individual traps are also disabled.

Refer to the

SW-MIB Objects

chapter of the

Fabric OS MIB Reference Guide

for detailed information

about the following SNMP tables that can be used to manage thresholds:

•

swFwClassAreaTable

•

swFwThresholdTable

Fabric Watch event settings

Fabric Watch uses two types of settings: factory default settings and user-defined custom settings.

•

Factory default settings are automatically enabled. These settings vary depending on hardware
platform, and cannot be modified.

•

You can create custom configurations to suit your unique environment.

You must first use the fwSetToCustom command to switch from default to custom settings, and
then use the advanced configuration options provided with the portThConfig, thConfig, and
sysMonitor commands to configure event behavior, actions, and time bases at the port level.

Use the advanced configuration option provided with the portThConfig, thConfig, and sysMonitor
commands to view and modify custom and default values for specified classes and areas in Fabric
Watch. You can customize the information reported by Fabric Watch by configuring event behavior
types, threshold values, time bases, and event settings. These area attributes are used to define
and detect events in Fabric Watch.

Fabric Watch notification types

Fabric Watch provides event notifications in several different formats to ensure that event details
are accessible from all platforms and operating systems. In response to an event, Fabric Watch can
record event data as any (or all) of the following alarm options.

E-mail alert

An e-mail alert sends information about a switch event to a one or multiple specified e-mail
address. An e-mail alert can send information about any error from any element, area, and class
(only one e-mail recipient can be configured per class). The e-mail specifies the threshold and
describes the event, much like an error message. You can configure multiple e-mail recipients per
class using the fwMailCfg command. You must separate the e-mail addresss with a comma and
include the complete e-mail address. For example, [email protected] is a valid email address; abc@12
is not.

For a recipient to receive the e-mail, you must configure one of the following settings:

•

Use the dnsConfig command to configure DNS settings to connect the switch to a DNS server.

•

In case a DNS server is not available, e-mails can be forwarded through a relay host. You can
configure the relay host IP address using the fwMailCfg command.

«
...
27
28
29
30
31
...
»

Содержание Fabric Watch































































































































Отзывы:

Нет отзывов

Похожие инструкции для Fabric Watch

Бренд: D-Link Страницы: 12

Бренд: Accelerated Страницы: 10

Бренд: Accelerated Страницы: 4

Elinx EIRP305-T

Бренд: B&B Electronics Страницы: 19

Бренд: Lindy Страницы: 4

Бренд: FOR-A Страницы: 39

Compact Emulator M30620T-CPE

Бренд: Renesas Страницы: 52

Procont LMC-008-IO

Бренд: janitza Страницы: 28

Бренд: RAIDAGE Страницы: 60

Бренд: UfiSpace Страницы: 35

Бренд: Point of View Страницы: 13

Duinotech Lilypad Plus XC3920

Бренд: Jaycar Electronics Страницы: 2

Бренд: A2B Electronics Страницы: 24

Бренд: ZALMAN Страницы: 6

ConnectX-3 Pro MCX349A-XCCN

Бренд: Mellanox Technologies Страницы: 35

Бренд: TRENDnet Страницы: 12

Bluespoon 17-1000

Бренд: Radio Shack Страницы: 1

Бренд: Matrix Switch Corporation Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды