Brocade Communications Systems CNA 1010, Руководство по устранению неисправностей

Страница: 82 / 144

62 Brocade Adapters Troubleshooting Guide
53-1001582-01
Statistics
3
CEE statistics (CNAs only)
Use BCU commands and HCM to display converged enhanced Ethernet (CEE) statistics, such as the
following:
•
Logical link layer discovery protocol (LLDP) frames transmitted, received, timed out, discarded,
with error, type-length-values (TLVs) discarded, and TLVs unrecognized.
•
Data center bridging capability exchange (DCBX) TLVs unrecognized, negotiation fails, remote
configurations changed, TLVs received and invalid, status up and down, and received invalid
configurations.
Displaying statistics through BCU
Use the following BCU command to display CEE statistics.
bcu cee --stats <port_id>
where:
<port_ID> The ID of the Ethernet port. This could be the PWWN, port hardware path, or
user-specified port name. This could also be the adapter-index/port-index.
For example, to specify adapter 1, port 1 you would use 1/1 as the port
identification.
Displaying statistics through HCM
Display the CEE Statistics dialog box using the following steps.
1. From the device tree, select a physical port of a CNA.
2. Select Monitor > Statistics > CEE Statistics.
CEE query (CNAs only)
Query the CEE information on a selected port and display such information as LLDP attributes and
the priority group table.
bcu cee --query <port_id>
where:
<port_ID> The ID of the Ethernet port. This could be the PWWN, port hardware path, or
user-specified port name. This could also be the adapter-index/port-index.
For example, to specify adapter 1, port 1 you would use 1/1 as the port
identification.
Ethernet statistics (CNAs only)
Use BCU commands and HCM to display total numbers of the following statistics:
•
Transmitted unicast octets
•
Transmitted unicast frames
•
Transmitted unicast VLANs
•
Transmitted multicast octets