Brocade Communications Systems CNA 1010, Руководство по устранению неисправностей

Страница: 84 / 144

64 Brocade Adapters Troubleshooting Guide
53-1001582-01
Statistics
3
<port_ID> The ID of the Ethernet port. This could be the PWWN, port hardware path, or
user-specified port name. This could also be the adapter-index/port-index.
For example, to specify adapter 1, port 1 you would use 1/1 as the port
identification.
Displaying statistics through HCM
To display the Ethernet Statistics dialog box, use the following steps.
1. Select an Ethernet port from the device tree.
2. Select Monitor > Statistics > Eth Statistics from the main menu.
OR
Right-click the Ethernet port and select Statistics > Eth Statistics from the list.
The Ethernet Statistics dialog box at the host level displays.
Ethernet IOC statistics (CNAs only)
Use HCM options and BCU to display statistics relevant to the Ethernet IO controller (IOC). A variety
of statistics display, such as the following:
•
Mailbox interrupts
•
Enable and disable events
•
Heartbeat failures
•
Firmware boots
•
Ethernet ICO statistic timeouts
•
Checksum help errors
•
VLAN transmit and receive transactions
You can also select options to keep running data, set the polling frequency, start polling data, and
reset statistics.
Displaying statistics through HCM
To display Ethernet IOC statistics use the following steps.
1. Select an Ethernet port from the device tree.
2. Select Monitor > Statistics > Eth IOC Statistics from the main menu.
OR
Right-click the Ethernet port and select Statistics > Eth IOC Statistics from the list.
The Eth IOC Statistics dialog box at the host level displays.