Brocade Communications Systems CNA 1010, Руководство по устранению неисправностей

Страница: 127 / 144

Brocade Adapters Troubleshooting Guide 107
53-1001582-01
HCM and Installer Message Reference
B
You are going to stop the
pending test(s) only.
All Started test(s) will
continue to run. Are you
sure you want to
continue? This occurs when the user stops a diagnostics
test before it finishes. Information message.
The External Loopback
Test requires a
plugged-in loopback
cable; otherwise, the test
will fail. Occurs when the user selects external loop
back test Plug in a loopback cable, and then
run external loopback test to
complete it successfully.
Unexpected Error. Test(s)
will be stopped. Occurs when the user tries to execute the
diagnostics test when the agent is stopped. Start the agent, and then execute
the diagnostics test
No tests have been
selected. Select one or
more tests. Occurs when the user clicks Start without
selecting any test Select a test, and then click Start.
You are about to delete
all the test logs. Are you
sure you want to
continue? Occurs when the user selects a test log and
selects option to clear the log. Warning. This clears all the test logs.
Unexpected Error. eth
Loopback Test will be
stopped. Please contact
the technical support Occurs when the user executes the loopback
test for a port and connection is lost. Verify the connection, and then
proceed with loopback test.
Unable to find the host.
Please provide another
host. Occurs when an invalid host name or IP
address is given in Host Name field in the
Setup for Discovery dialog box. Enter a valid host name or IP
address in the Host Name field.
Failed to connect to the
Agent Occurs when the agent connection is lost. Start the HCM agent service, and
then proceed.
Unable to find the host.
Please provide another
host. Occurs When scoped link local ipv6 address
(such as fe80:216:cbff:fea9:c3b5%en0 or
fe80:216:cbff:fea9:c3b5%3) is provided in the
Setup for Discovery dialog box. Provide the IPv6 address without
using the scope-id and the delimiter
(%). Just use
fe80:216:cbff:fea9:c3b5.
Enter a valid host name
or IP address Occurs when the user clicks Add button in the
Syslog Server Configuration dialog box without
providing any host name or IP address or by
providing an invalid host name or IP address Enter a valid host name and IP
address in the host name field of
the Setup for Discovery dialog box.
Enter a valid host name/IP address
in the Host name/IP address field of
Syslog Server Configuration dialog
box.
Provide a port number in
the range [1025-65535]. Occurs when the user provides a port number
out of the range (1025-65535) in the Setup for
Discovery dialog box. Enter a port number between 1025
and 65535.
Refresh cannot be
performed while the
Event Properties dialog is
open. Occurs when the Event Properties dialog box is
kept opened and the user tries to refresh the
master log. Close the Event Properties dialog
box, and then click Refresh to
display updated values.
TABLE 14 Host Connectivity Manager messages (continued)
Message Cause Corrective Action or Notes