page.
15
/
23
15
MAINTENANCE AND THE LUBRICATION OF THE MACHINE
6.3
CHANGING THE BLADE
1.
All air and electrical connections should be disconnected.
2.
Protective covers must be removed.
3.
The nuts on the motor spindle where the saw is installed are must be removed from the saw
place by opening in the opposite direction to each others.
4.
After the saw is replaced with the new one, the same procedure is reversed.
5.
After the saw is replaced the covers are replaced too.
Wear gloves during the saw replacement.
Picture 6.2-1 Blade changing
