page.
12
/
23
12
PRINCIPLES OF WORK
5.3
OPERATION OF THE MACHINE
The below prerequisites should be ready in order for the machine to be ready to operate.
Power switch ON
Front protection cover closed.
Profile clamping pistons back
Note: During the initial operation, check the rotation of the saw.
Before the operation starts it is necessary to be convinced of absence people (service staff,
etc.) near to the machine which can receive damages at movement of units of the machine;
the operator should be attentive for the purpose of protection of health of persons which
can be near to it, also it is necessary to warn surround persons about machine operation.
When the machine is ready to operate, the below actions are taken:
1.
The profile is placed to the table horizontally.
2.
If you want to cut in a different angle, you can adjust the angle by pulling up the angle fixing
handle (4)
3.
By stepping the profile pressing pedal (3) clamps come down and press the profile.
4.
Press the saw start button, the blade head is set down by pulling down the handle.
5.
While the blade is cutting, the protection cover opens automatically.
6.
When we pull up the handle which pulls down the saw, protection cover closes
automatically.
7.
Push the pedal (3) again, and the profile squeezing pistons rises, let the profile free.
8.
The cutting work is completed.
