page.
11
/
23
11
PRINCIPLES OF WORK
5.
PRINCIPLES OF WORK
5.1
MAIN SETTINGS
►
All necessary factory options are performed on the equipment. At wear of mechanical units or
details, at change of profile system it is necessary to change some options. Necessary options are
given below.
5.1.1
MEASURE CALIBRATION
►
Measure the profile after cutting. Set the dimension you get on the ruler (1) by the pointer (2),
weakening its attachment.
Picture 5.1-1Measure calibration
5.2
MACHINE CONTROL ELEMENTS
Picture 5.2-1 Machine control elements
1.
Power switch
2.
Motor “Start” button
3.
Clamping pedal
4.
Cutting degree adjustment
1
2
1
3
2
4
