Brobo S315D, S350D, S400B, Руководство по эксплуатации и обслуживанию

Страница: 43 / 55

Brobo Group
APPENDIX - RISK/HAZARD ASSESSMENT
Hazard Type Hazard Identification
Hazard
Assessment
Hazard Management Strategies
(Recommended for the Purchasing / Buyer / User)
Mechanical
Cutting/Severing Low/Med
 Keep machine correctly guarded and operational at
all times.
 Keep hands clear of rotating blade when cutting.
Entanglement Low
 Do not wear loose jewellery, clothing or items that
might get caught in the saw.
 Always keep the work area free of unnecessary
objects or tools.
Puncturing Low
 Wear protective gloves when handling and /or
changing the blades.
 Power source is to be isolated prior to opening
electrical enclosures.
Electrical
Electrocution Low
 Remove the power supply when any maintenance
and/or repairs are to be undertaken.
 Power source is to be isolated prior to opening
electrical enclosures.
Thermal
Burn Low
 Under normal working conditions the gearbox can
become hot thus, do not touch.
 Be careful when handling workpiece after cutting, as
it might be very hot.
Noise
- Low
 Under no load testing, the noise level measured is
below 85 dB (A).
 If the noise level becomes too high during a cutting
cycle, stop the process and inspect for problem, if
any are present.
Substance
- Low
 Care must be taken as some coolants may be
harmful or cause allergic reactions. Please read the
labels carefully.
 Keep the work area clean and regularly remove
excess coolant, oils and other impurities.
Hazardous Events
Unexpected Start Up Low
 During a power failure, turn the machine off.
 If problem persists, please contact Brobo Group
engineering department.
Failure of Control System Low
 If the ON/OFF switch fails, isolate the machine at
the power source.
 Ensure that no fuses are blown and that all electrical
circuitry are operating within normal parameters.
Additional
Hazards
Operator Error Low
 Ensure blades, clamps and materials are correctly
secured.
Impact Low
 Wear safety glasses at all times during cutting cycle.
MACHINE TYPE:
SERIAL NO.:
RECEVING COMPANY:
(SAFETY OFFICER)
BROBO GROUP (AUST) PTY. LTD.
A.C.N. 098 264 316
A.B.N. 42 098 264 316
8 Fowler Rd, Dandenong, 3175
PO BOX 4274 Dandenong Sth, 3164
Victoria, AUSTRALIA.
Tel: 61 3 9792 9944 Email: info@brobo.com.au
Fax: 61 3 9791 9955 Website: www.brobo.com.au
Quality
Endorsed
Company
ISO 9001 Lic. 10292
Standards Australia
Quality System
