Brobo S315D, S350D, S400B, Руководство по эксплуатации и обслуживанию

Страница: 6 / 55

Brobo Group
CHAPTER 1 - Installation of the Machine
1.1. Unpacking and Handling the Machine
Upon receiving the
Brobo Group S315/S350/S400 Series Metal Cutting Saw
, the machine should be standing
upright and positioned centrally on top of a wooden pallet. While the machine is situated on the pallet, position the
forklift arms under the pallet between the runners, keeping in mind that the machine is
head heavy . Move the entire
unit to an accessible area as close as possible to the final location.
Carefully remove the wooden frame surrounding the saw unit (Figure 1). Once completed, proceed by elevating the
machine away from the pallet base using a sling harness wrapped around the cutting head of the saw. Ensure that
the floor is as level as possible before finally positioning the machine to the desired location.
FIGURE 1 .
Handling of Metal Cutting Saw Unit
PLEASE OBSERVE AND FOLLOW THE INSTALLATION INSTRUCTIONS ON PAGE 7
WARNING – HEAD HEAVY MACHINES
The metal sawing machines are heaviest where the saw heads are fitted and as such, care must be
taken while relocating or moving the machines.
!