e-mail:
voice:
360.854.9559
fax:
866.783.1742
10
ESS-1 Installation and Operation Manual
APPLICATIONS CONT’D
Setup Menu Options
Change Setup:
0 Server configuration
1 Channel 1 configuration
3 E-mail settings
5 Expert settings
6 Security
7 Factory defaults
8 Exit without save
9 Save and exit Your choice ?
c - Select option 1 and press Enter.
d - To enter a value for a parameter, type the value and press Enter, or to confirm
a current value, just press Enter.
ESS-1, number 1: Channel 1, Basic parameters
Hardware:
Ethernet
IP Address
192.168.001.017
Baud rate:
9600
I/F mode:
4C
Flow:
00
Port No:
10001
Remote IP Address:
192.168.001.016
Remote Port No:
10001
Connect mode:
C1
Disconnect Mode:
00
Flush Mode:
00
When you are finished, save the new configurations (option 9). The ESS-1 will now
reboot. Go back to step 1 of “Quick Start Application Example - 2” to set up the sec-
ond ESS-1, but enter the Channel 1 data listed below.
ESS-1, number 2: Channel 1, Basic parameters
Hardware:
Ethernet
IP Address:
192.168.001.016
Baud rate:
9600
I/F mode:
4C
Flow:
00
Port No:
10001
Remote IP Address:
192.168.001.017
Remote Port No:
10001
Connect mode:
C1
Disconnect Mode:
00
Flush Mode:
00
When you are finished, save the new configurations (option 9). The unit reboots.
Any data transferred in ESS-1, will appear in the 2nd ESS-1 and vice-versa.
NOTE:
The IP addresses used
here are examples
ONLY.
WEBSITE:
Visit our web site for
product updates and
additional information
