BRITEQ®
13
BTX-700SW
on the display, use UP and DOWN button to select
No
(normal while changing color) or
Yes
(blackout while change color), Press MENU button back to the last menu or let the
unit idle one minute to exit menu mode.
BL.O. Gobo Change
—
Blackout while change gobo
Select
BL.O. Gobo Change
, press ENTER button to confirm, present mode will blink
on the display, use UP and DOWN button to select
No
(normal while changing gobo) or
Yes
(blackout while changing gobo), press ENTER button to store. Press MENU button
back to the last menu or let the unit idle one minute to exit menu mode.
Lamp Setting
Attention: The lamp will not be on unit detected temperature is lower than 45
°
C.
Enter menu mode, select
Fixture Setting
, press ENTER button to confirm, use UP and
DOWN button to select
On/Off, State/Power on, Off Via DMX, On if DMX on, Off if
DMX off, Cooling Mode, Ignition Delay
or
Low Power Delay.
.
On/Off
—
Turn on/off the lamp
Select
On/Off
, press ENTER button to confirm, present mode will blink on the display,
use UP and DOWN button to select
On
(lamp on) or
Off
(lamp off), press ENTER
button to store. Press MENU button back to the last menu or let the unit idle one minute
to exit menu mode.
State/Power On
—
Lamp state while power on
Select
State/Power On
, press ENTER button to confirm, present mode will blink on the
display, use UP and DOWN button to select
On
(Lamp on while power on) or
Off
(Lamp
off while power on), press ENTER button to store. Press MENU button back to the last
menu or let the unit idle one minute to exit menu mode.
Off Via DMX
—
Turn off the unit via DMX controller
Select
Off Via DMX
, press ENTER button to confirm, present mode will blink on the
display, use UP and DOWN button to select
Yes
(turn off the unit via DMX controller
available) or
No
(turn off the unit via DMX controller impracticable), press ENTER
button to store. Press MENU button back to the last menu or let the unit idle one minute
to exit menu mode.
(When you operate the unit via DMX controller, set the value of channel “special
function” to “lamp off”, waiting for 5 seconds, then the lamp will be off if you choose
“yes” mode).
On If DMX On
—
Lamp turns on when DMX signal is detected
Select
On If DMX On
, press ENTER button to confirm, present mode will blink on the
display, use UP and DOWN button to select
Yes
(Lamp turns on when DMX signal is
detected) or
No
(keep the present state), press ENTER button to store. Press MENU
button back to the last menu or let the unit idle one minute to exit menu mode.
(If the
lamp is off via DMX signal, you can reconnect the DMX controller to make the lamp on).
BRITEQ®
14
BTX-700SW
Off If DMX Off
—
l Lamp turns off when DMX signal is cut off
Select
Off If DMX Off
, press ENTER button to confirm, present mode will blink on the
display, use UP and DOWN button to select
Yes
(Lamp turns off when DMX signal is
cut off), press ENTER button to store. Press MENU button back to the last menu or let
the unit idle one minute to exit menu mode.
Cooling Mode
—
Lamp turns off when DMX signal is cut off
Select
Cooling Mode
, press ENTER button to confirm, present mode will blink on
the display, use UP and DOWN button to select
Auto
(fans speed adjust automatically)
or
High
(fans run in high speed), press ENTER button to store. Press MENU button
back to the last menu or let the unit idle one minute to exit menu mode.
Ignition Delay
—
Delay time between power on and lamp on
Select
Ignition Delay
, press ENTER button to confirm, present mode will blink on the
display, use UP and DOWN button to adjust the delay time from 0S to 255S, press
ENTER button to store. Press MENU button back to the last menu or let the unit idle
one minute to exit menu mode.
Low Power Delay
—
Delay time between reduce lamp power and shutter off the unit
Select
Low Power Delay
, press ENTER button to confirm, present mode will blink on
the display, use UP and DOWN button to adjust the delay time from 0S to 255S, press
ENTER button to store. Press MENU button back to the last menu or let the unit idle
one minute to exit menu mode.
(If you set the low power delay time to 3S, the lamp will run in half power 3 seconds
after the unit shutter off)
Display Setting
Enter menu mode, select
Display Setting
, press ENTER button to confirm, use UP
and DOWN button to select
Display Inverse, Backlight Auto Off, Backlight Intensity
or
Temperature unit
.
Display Inverse
Select
Display Inverse
, press ENTER button to confirm, present mode will blink on the
display, use UP and DOWN button to select
No
(normal display) or
Yes
(inverse
display), press ENTER button to store. Press MENU button back to the last menu or let
the unit idle one minute to exit menu mode.
Backlight Auto Off
Select
Backlight Auto Off
, press ENTER button to confirm, present mode will blink on
the display, use UP and DOWN button to select
No
(display always on) or
Yes
(display
goes off one minute after exiting menu mode), press ENTER button to store. Press
MENU button back to the last menu or let the unit idle one minute to exit menu mode.
Backlight Intensity
Select
Backlight Intensity
, press ENTER button to confirm, present mode will blink on
the display, use UP and DOWN button to adjust backlight intensity from
1
(dark) to
10
(bright), press ENTER button to store. Press MENU button back to the last menu or let
the unit idle one minute to exit menu mode.
