BRITEQ®
9
BTX-700SW
6. How To Set The Unit
6.1 Power On Display
Every time you turn on the unit, it will run built-in program to reset all motors to their home
position, the display will show as fig.4, you may hear some noises for about 20 seconds. It
will show warning sign if it goes wrong during resetting and you can press the MENU button
to view the error information. After that the unit will be ready to receive DMX signal and the
display will show as fig.5.
Fig.4
Fig.5
Explanation of fig.5:
Lamp 40
°
C
Present temperature of base CPU is 40
°
C
001
Present start address
Md.1 22Ch.
Present channel mode is mode 1 (22 channels mode)
Lamp 30
°
C
Present temperature of lamp is 30
°
C
Warning signal blinking direct resetting error
6.2 Main Function
Turn on the unit, press
MENU
button into menu mode, press
UP
and
DOWN
button until the
required function is shown on the monitor. Select the function by
ENTER
button. Use
UP
and
DOWN
button to choose the submenu, press the
ENTER
button to store and
automatically return to the last menu. Press
MENU
button or let the unit idle one minute to
exit menu mode.
In the event of disconnecting with mains power, press
UP
button for one minute to enter
into menu mode. Press MENU button or let the unit idle one minute to exit.
The main functions are shown below
（
the grayed boxes are preset settings
）
:
BRITEQ®
10
BTX-700SW
Lamp Setting
On/Off
OFF
ON
State/Power On
OFF
ON
Off Via Dmx
No
Yes
On if Dmx On
No
Yes
Off if Dmx Off
No
Yes
Cooling Mode
Auto
High
Ignition Delay
0-255S
Low Power Delay
0-255S
Auto Test
Manual Test
Fixture Test
Fixture Information
Fixture use time
Fireware Version
Lamp On time
Exit
Reset Time
Display Setting
Backlight Auto Off
No
Yes
Display Inverse
No
Yes
Temperature Unit
C
F
Backlight Intensity
1-10
MENU
(1)
Fixture Setting
Pan Inverse
No
Yes
Tilt Inverse
No
Yes
Bl.o. P/T Moving
No
Yes
Bl.o. Color Change
No
Yes
Bl.o. Gobo Change
No
Yes
DMX Functions
DMX Address
1
512
View DMX Value
DMX Channel Mode
Mode 1(22)
Mode 2(22)
Mode 3(29)
WDMX Setting
Active
Retransmit
Reset Menory
No
Yes
No
Yes
No
Yes
P/T Feedback
No
Yes
