05. TO ATTACH AND USE THE CANOPY
A1
To attach the canopy, insert the canopy mouldings into the frame
mouldings until they connect together. The back flap of the
canopy can be attached to the main canopy with the zipper
attachment.
24
09
A2
Attach the snaps located on the straps on the sides of the canopy
to the top of the handle tubes, then fold the strap up under the
canopy back flap and secure strap with hook and loop to the
underneath of the canopy.
13. TO INSTALL THE INFANT CARRIER (Sold Separately)
A
Stand in front of the stroller and pull the fabric back from the sides
of the stroller to expose the stroller hinge.Take one Infant Carrier
adaptor at a time and
insert the adaptor into the stroller hinge as
shown. Push on the adaptor until you hear a ‘click which indicates
the adaptor has locked in. Pull up on each adaptor to check they
have fully locked in.
B
Face the feet end of the Infant Carrier towards the stroller
backrest. With the Infant Carrier handle in the upright position
locate the Infant Carrier handle mouldings over the adaptors on
either side. Notice the indicator is GREEN.
Adaptor
Indicator
Adaptor
A
B
Please Note: Fit adaptors standing in front of the stroller. Infant
Carrier adaptors are marked Left & Right for correct fitting.
