08
25
03. TO FIT AND REMOVE THE REAR WHEELS
04. TO USE THE SWIVEL WHEELS
A
To fit the rear wheels,
insert each wheel axle into the moulding
and push in until locked. You should hear a ‘click’ which indicates
the wheel has locked in. Pull on the wheel to make sure it is
engaged. Repeat the process if not locked in.
B
To remove the wheels, pull the metal latch downwards on the
underneath of the brake moulding to release the wheel, and then
pull the wheel off.
B
A
A
Press the swivel lock down to lock the swivel wheels.
Push the swivel wheel lock up to allow the wheels to swivel.
Note: Always lock the swivel wheels when using the stroller on
rough surfaces as it will minimise wheel wobble.
Metal Latch
C
Lower the Infant Carrier into the adaptors. Press down firmly on
both sides.
D
The Infant Carrier now needs to be locked securely into the
adaptors. Squeeze in and hold the latches on either side of the
handle, rotate the handle backwards. The GREEN indicator will
now turn to RED.
