01. TO OPEN THE STROLLER
Storage
latch
A
Release the storage latch (1) located on the rear leg.
Open the frame as shown by the arrows (2) until you hear a ‘click’
which indicates the frame is fully opened and locked. Push down
on the stroller handle to confirm that frame is locked.
1
2
2
2
02. TO ASSEMBLE AND REMOVE THE FRONT SWIVEL WHEELS
A
To assemble the front swivel wheels,
take each swivel wheel
assembly and insert and push it into each of the wheel mouldings
until you hear a ‘click’ which indicates the wheel is locked in.
Check each wheel is fully locked by pulling against it.
A
A
A
B
To remove the front swivel wheels, locate and press in the red
button on top of the wheel moulding.
B
26
07
13. TO INSTALL THE INFANT CARRIER (Cont)
E
Squeeze and
release the handle latches. Then with one hand
holding the front of the Infant Carrier, push the Infant Carrier
handle all the way down until you hear it lock into the adaptors.
The handle indicator should now be GREEN and the Infant Carrier
should be locked into the adaptors. If the indicator is RED the
Infant Carrier handle is not in the locked position, repeat step D.
IMPORTANT: Ensure that the Infant Carrier is locked into place by
pulling up on both sides. Do not use the Infant Carrier if it is not
correctly installed.
Please Note: The Infant carrier has been fitted with a hood when
using the stroller. The hood can also be used in the car. Refer to
the Infant Carrier instructions regarding placing and securing
your baby in the Infant Carrier.
E
