20
13
www.britax.com.au
www.britax.com.au
06. TO ADJUST THE BACKREST
A
To raise the backrest, hold the main adjuster moulding in one
hand, then grasp the plastic rings fixed to the adjuster straps
with the other hand. Push up on the main adjuster moulding
at the same time pull the adjuster strap to the desired position.
B
To lower the backrest, support the backrest with one hand and
with the other hand pull down the on the backrest adjuster
button and lower the backrest to the desired position.
Backrest adjuster button
Main adjuster
moulding
Plastic rings
10. TO FIT THE RAIN COVER
B
To
secure the rain cover, (
B1
)attach the hook and loop strips on
the sides of the rain cover. (
B2
) Now attach the hook and loop
straps on the front of the rain cover around the wheel
mouldings above the swivel wheel lock.
B1
B2
B2
11. TO USE THE STROLLER
• With your hand through the wrist tether strap loop, push the
stroller holding the handle.
• The s
troller can be steered in the desired direction - allowing the
front wheels to swivel will make this easier.
• The front wheels may wobble or oscillate when walking fast.
• Locking the front swivel wheels will stop this.
• The stroller can be taken up kerbs by either pressing down on the
handles and raising the front wheels or turning the stroller around
and pulling the stroller up the kerb.
• Caution is required when pushing the stroller on a steep slope as
the stroller may become unstable. Always hold the handles firmly.
• Whenever you stop, always apply the brakes before you leave the
stroller.
