background image

Instructions for Installation & Use

 - Series No. 8000/B/2010

Instructions for Installation & Use

 - Series No. 8000/B/2010

10

11

SPECIAL FEATURES - TODDLER RESTRAINT

SPECIAL FEATURES - TODDLER RESTRAINT

NOTE: 

Not all features are supplied on some models. "if fitted" is used to indicate some of the features 

that may not be on the seat supplied.

Front of Vehicle

1.  Car's Anchor Fitting 

2.  Top headrest slots (for Child Harness only)
     and
     Lower headrest slots (for Integral Harness 

and Child Harness)

3.  Car’s lap-sash seat belt or lap belt.

4.  Armrests. 

5.  Red seatbelt path labels (Booster Seat)        

(1 each side) 

6.  Recline Foot in upright position.

7.  Cup Holder 1 each side.

8.  SLIDEGUARD™ converter for Booster mode.
     Shown in storage recess undercover. (See  

warning Page 31) 

9.  Harness Adjustment Strap

10. Harness Adjustment Button. 

11. Padded cover for comfort

12. Quick release harness Buckle (Red button).

13. 

Padded insert (if fitted)

14. Shoulder Pads

15. Fully adjustable 6 point harness. 

16. Shoulder Height Markers

17. Adjustable Headrest

18. Upper Anchorage Strap Adjuster

19. Upper Anchorage Storage Strap

20. Adjustable Upper Anchorage Strap 

21. Attachment Clip 

To be used only in a forward-facing position for a child approximately 6 months of age up to 
approximately 4 years of age using the in-built harness.

Harness Tongues

Harness 
Buckle

1

2

3

5
6
7

4

8

9

12

10

17

16

15

14
13

18 19 20 21

11

 

TODDLER USE

(WITH IN-BUIL

T HARNES

S)

 

TODDLER USE

(WITH IN-BUIL

T HARNES

S)

Содержание Maxi AHR




































Отзывы: