Instructions for Installation & Use
- Series No. 8000/B/2010
Instructions for Installation & Use
- Series No. 8000/B/2010
HOW TO SETUP
HOW TO SETUP
Do not use the restraint with harness shoulder straps set at different heights or fed through
mismatching slots. Ensure harness straps are not twisted and that all straps are secure by pulling each
harness strap.
Insert Finger above the
webbing to ensure shoulder
slots in headrest and restraint
match up.
Harness Shoulder straps
IMPORTANT :
E. Insert shoulder straps through the desired headrest slots which will position shoulder strap level
with or above the child’s shoulder, see below. Ensure that the shoulder strap passes through
matching slots in the restraint.
F. Ensure there are no full twists in the harness strap and the buckle tongues face the correct way.
G. Connect shoulder straps to metal strap connector at rear of restraint, as shown in (B) on page 17.
TODDLER USE
(WITH IN-BUIL
T HARNES
S)
TODDLER USE
(WITH IN-BUIL
T HARNES
S)
18
19
INSTALLING INTO VEHICLE
(FORWARD FACING) (UPRIGHT OR RECLINED)
A. Determine whether an upright or reclined installation is
preferred as shown right.
B. To move the Recline Foot from upright to reclined mode or
vice versa. Pull the Foot outwards to unlock it, then rotate
the foot. Push to lock in place. See diagrams below.
Reclined
Upright
Pull out
Rotate
Push in
to lock
