Instructions for Installation & Use
- Series No. 8000/B/2010
Instructions for Installation & Use
- Series No. 8000/B/2010
HOW TO INSTALL
Engage
into Seat
belt buckle
Far seat
belt slot
Yellow Belt Path label
FORWARD-FACING BELT PATH
Near seat belt slot
Seat belt feeds
through slot in
seat between
trim and seat
back.
Car Seat Belt
HOW TO INSTALL
E. Engage car seat belt buckle
and tongue. Push down on
the restraint while pulling on
the lap portion to remove all
slack from the belt. Then,
pull the remaining slack
in the sash belt and allow
excess belt to feed back into
the retractor.
Engage
seatbelt
Remove all
slack from
lap portion,
then sash.
Feed through
seat belt path.
NOTE: Some car seats have
more rearward slope than
others. Use a rolled up towel
or padding under the seat for
contoured vehicle seats to
prevent excessive recline.
If the car seat belt does not
remain tight, then contact
your local fitting station,
or Safe-n-Sound customer
service for a gated 3-bar
slide (order No. 0215).
Rolled up towel or padding
TODDLER USE
(WITH IN-BUIL
T HARNES
S)
TODDLER USE
(WITH IN-BUIL
T HARNES
S)
20
21
C. Position restraint centrally to the chosen
position in forward facing mode and align
restraint centrally to the chosen seat-
ing position. Some vehicle seat fabrics
(particularly velours) may be damaged
by a child restraint used continuously. We
recommend the use of the Safe-n-Sound™
Messy Mat or other protection to keep the
vehicle seat in good condition.
D. Fully lengthen lap or lap sash seat belt and
insert through near seatbelt slot. Ensure the
seatbelt is between the trim and seat back
as you push the seatbelt out through the far
seatbelt slot.
