Instructions for Installation & Use
- Series No. 8000/B/2010
Instructions for Installation & Use
- Series No. 8000/B/2010
24
HOW TO USE
PLACING TODDLER IN
THE RESTRAINT
A. Lengthen harness by pressing Harness
Adjustment button while pulling on either
shoulder strap until the harness will
accommodate the child.
B. Place child in the restraint and feed each arm
through shoulder straps. Pull harness buckle
up between child's legs.
Pull harness
adjuster
strap to
tighten.
Pull to
lengthen
Press and hold
TODDLER USE
(WITH IN-BUIL
T HARNES
S)
A
B C
25
HOW TO USE
C. Fit either harness buckle tongues into the harness
buckle followed by the other tongue. A click is heard
when the last tongue is fully engaged.
Should the second tongue not insert - press the
red button and reinsert the tongues. Ensure secure
engagement by pulling harness straps. If the harness
buckle does not engage correctly then it
may require cleaning - refer to page 55.
D. Ensure slack is removed from harness lap strap by
pulling shoulder straps then pull harness adjustment
strap to adjust harness to a comfortable but firm fit.
Ensure that any slack in harness straps is removed.
Shoulder Harness Straps must fit firmly to the child.
A loose harness could result in serious injury in an
accident.
E. Pull the harness adjustment strap to remove slack so
the harness fits the child with minimal slack. Do not
over tighten.
Do not use restraint if straps do not tighten and contact
your local authorised service agent for repair.
Press red button on harness buckle then both harness tongues will be released. Lift the shoulder
straps from the child’s shoulders and remove the child.
TO REMOVE TODDLER
Harness
Lap Straps
Shoulder
Straps
Crotch
Straps
Pull to remove slack from
harness lap straps
Click
Tongue
Buckle
C
D
TODDLER USE
(WITH IN-BUIL
T HARNES
S)
