Britax FRONTIER 85 Скачать руководство пользователя страница 30

Страница: 30 / 39

Fasten the chest clip.

The correct height for the chest

clip is at the middle of the

chest at armpit level.

The HUGS

™

chest pads may

be placed in any position

that is comfortable for the

child within the range of the

correctly placed chest clip.

Loosen the harness.

Press release lever

Pull both harness straps forward

Open the chest clip.

Press tabs

Pull apart

Release the buckle and place

the harness straps around the

armrests.

Pull the harness adjuster strap

to tighten the harness.

The harness should have

a comfortable but snug fit

around the child. A snug strap

should not allow any slack. It

lies in a relatively straight line

without sagging. It does not

press on the child’s flesh or

push the child’s body into an

unnatural position. You should

not be able to pinch excess.

Pull the harness adjuster away

from the child seat (parallel to

the ground) to tighten.

Do not pull sideways.

Checklist

Before traveling, verify that the:

Harness straps are not twisted.

Harness is snug.

Buckle is fastened.

Chest clip is at the child’s armpit level.

Place the child in the child

seat and position the harness

straps around the child.
Fasten the harness buckle.

Proper connection is confirmed

with an audible click after

inserting each buckle tongue.

Securing Your Child

Содержание FRONTIER 85








































Результаты поиска

Содержание FRONTIER 85

Отзывы:

Похожие инструкции для FRONTIER 85

Бренды по названию

Популярные бренды

Britax FRONTIER 85, Руководство пользователя

Результаты поиска

Содержание FRONTIER 85

Отзывы:

Похожие инструкции для FRONTIER 85

Бренды по названию

Популярные бренды