22
23
Using the LATCH Connectors
The LATCH connectors are located on the sides of the shell in the
storage slots. Store the LATCH connectors when not in use.
To remove the LATCH connector from the storage slot or lower
anchor:
Press and hold the red release
1
button.
Pull the LATCH connector
2
from the storage slot or lower
anchor.
To attach the LATCH connector to the storage slot or lower
anchor:
Firmly push the LATCH connector
into the slot or lower anchor until a
click is heard to store.
NOTE:
The LATCH connectors
store in the slots upside-down.
Using Lower Anchors and Tethers for Children (LATCH)
LATCH SYSTEM ANCHOR LOCATIONS
Tether
Anchor
Lower LATCH
Anchors
The figure above shows typical locations for lower anchors and
tether anchors in a vehicle. Check your vehicle owner’s manual
for the exact LATCH anchor locations and seating positions
(if equipped), information on use with a child seat, and for the
maximum weight rating for the LATCH anchors.
Standard vehicle seat spacing between LATCH anchors is 11 inches
(27.9 cm). This child seat can be used in a seating position with up
to 20 inches (50.8 cm) of space between the LATCH anchors if the
vehicle manufacturer allows.
Top
Child Seat Functions
Child Seat Functions
