Britax FRONTIER 85 Скачать руководство пользователя страница 32

Страница: 32 / 39

Pull the harness straps

through the shell and cover to

the front of the child seat.

Loosen the harness.

Press release lever

Pull both harness straps forward

Unbuckle the harness, then

move the harness adjuster to

the highest position.

Remove the belt shield and

unhook both harness straps

from the yoke.

Remove the screw to unlock

the head restraint adjuster and

raise the head restraint to the

highest position.

Store the screw in the slot in

the shell.

Unhook the elastic bands,

then remove the cover from

the head restraint.

Be careful not to damage the

energy-absorbing foam.

Unfasten the clips behind the

armrests, then pull the cover

from the lower belt guides.

Cover Removal

Care and Maintenance

WARNING!

Never remove the buckle tongues from the harness.

•

DO NOT remove the HUGS

•

™

pads from the harness straps.

Locking

Screw storage

Содержание FRONTIER 85








































Результаты поиска

Содержание FRONTIER 85

Отзывы:

Похожие инструкции для FRONTIER 85

Бренды по названию

Популярные бренды

Britax FRONTIER 85, Руководство пользователя

Результаты поиска

Содержание FRONTIER 85

Отзывы:

Похожие инструкции для FRONTIER 85

Бренды по названию

Популярные бренды