Britax FRONTIER 85 Скачать руководство пользователя страница 27

Страница: 27 / 39

Pull the adjuster strap to

tighten the harness.

Pull the harness adjuster away

from the child seat (parallel

to the ground) to tighten. See

page 57.

Before reattaching the harness

straps, hold the harness yoke

as shown, and ensure that the

adjuster strap attached to the

yoke is not twisted.

Adjuster

Strap

Checklist

Check that the harness straps are not twisted

Ensure the chest clip and HUGS

™

pads face outward.

Check that the adjuster strap is not twisted

Check that the harness yoke is in the proper orientation and

that the harness straps are nested securely onto the yoke

Slide nested harness straps

completely onto the harness

yoke.

Replace the belt shield over

the harness straps and yoke.

IMPORTANT:

Check the harness straps and attachments before

using the child seat.

Check that Harness

Yoke hangs as shown,

and that Harness

Straps are nested

securely on the yoke

Check that the

Chest Clip and

HUGS™ Chest

pads face outward

Check that

Harness Straps

are not twisted

Check that Adjuster

Strap is not twisted

FRONT

BACK

Switching Between Modes

Содержание FRONTIER 85








































Результаты поиска

Содержание FRONTIER 85

Отзывы:

Похожие инструкции для FRONTIER 85

Бренды по названию

Популярные бренды

Britax FRONTIER 85, Руководство пользователя

Результаты поиска

Содержание FRONTIER 85

Отзывы:

Похожие инструкции для FRONTIER 85

Бренды по названию

Популярные бренды