background image

2

3

Important Safety Information

Need help?

 Give us a call on

 0844 701 6273

 and speak to one of our trained advisors.  

 

Please read these instructions 

thoroughly and retain for future use. 

 All products manufactured and 

supplied by Bristan are safe provided 

they are installed, used correctly 

and receive regular maintenance in 

accordance with these instructions.

• If you are in any doubt about your 

ability to install this product safely 

you must employ the services of 

an experienced qualified plumber/

electrically qualified person.

       

Warning:

 Do not operate the 

shower unit if you suspect it is frozen. 

Do not site the shower unit where 

it might be subjected to freezing 

conditions.

• 

Do not install this shower unit in a 

room/environment without adequate 

ventilation or an extractor fitted. This 

is required to prevent condensation 

forming within the unit.

 Do not operate the shower unit if the 

showerhead or spray hose has been 

damaged or is blocked.

 Do not block the flow of water 

from the showerhead, by placing it 

(smothering it) on your hand or any 

other part of your body or foreign 

object.     

 Do not operate the shower if the 

water stops flowing during use or if 

the water is leaking from the shower 

unit itself. Turn off at the mains 

BEAB (British Electrotechnical 

Approvals Board) approval of safety.

electrical supply and refer to the 

Troubleshooting section (see page 21) 

or contact Bristan Customer Services.

 Do not crush or kink the shower 

hose, this could damage the hose, 

cause leaks and activate the pressure 

relief device (PRD).

 Installations subject to regular and 

rapid changes in the water supply 

pressures should be avoided.

 This appliance must be permanently 

connected to the water mains and not 

connected by a hose-set.

 

Warning:

 This appliance can 

be used by children aged from 8 

years and above and persons with 

reduced physical, sensory or mental 

capabilities or lack of experience and 

knowledge if they have been given 

supervision or instruction concerning 

use of appliance in a safe way and 

understand the hazzards involved.

 Children shall not play with the 

appliance.

 Cleaning and maintenance shall 

not be made by children without 

supervision.

Important: 

The shower unit must be 

switched off at the isolating switch 

(pull cord) when not in use

Содержание Bliss BL385 W





























Отзывы: