4
General Safety Information
•
Always switch off the power at
the consumer unit and isolate the
electrical supply before making any
electrical connections or if you have to
remove the cover of an installed unit.
•
The unit
must
be mounted on the
finished wall surface (usually tiled).
Under no circumstances must you
tile up to or seal around the unit as
this may prevent air circulating and
condensation escaping.
•
This shower unit
must
not
be
modified* in any way as this will
invalidate the guarantee.
* Except for top left pipe entry (see
page 12) where the product has
been designed to be modified by the
installer.
•
You
must not
fit a “water saving”
handset (whereby the flow of water
can be restricted or turned off) to the
shower, otherwise this can result in
scalding and/or unit failure.
Need help?
Give us a call on
0844 701 6273
and speak to one of our trained advisors.
