![BRIKA BMG-24 Скачать руководство пользователя страница 10](http://html1.mh-extra.com/html/brika/bmg-24/bmg-24_product-manual_2812160010.webp)
DO NOT use any abrasive or flammable cleaning fluids;
DO NOT hose down, immerse or pressure wash any part of the griddle, excluding the catch tray.
NEVER use a scrubber pad, steel wool or abrasive material, or cleaners containing chlorine, iodine and ammonia or bromine chemicals, as these
will deteriorate the stainless steel and shorten the life of the unit.
IF CLEANING THE BURNER OF THE GRIDDLE, THE MAIN GAS VALVE MUST BE SWITCHED TO THE CLOSED POSITION. AFTER
CLEANING, THE GAS LINE CAN BE SWITCHED BACK TO THE OPEN POSITION. PLEASE FOLLOW TH ELIGHTING INSTRUCTIONS IN THIS
MANUAL TO RELIGHT THE GRIDDLE’S PILOT LIGHTS.
RECOMMENDED CLEANING
It takes very little time and effort to keep the griddle attractive and performing at the top efficiency. Please follow the:
cleaning steps below:
PART
REQUIRED ACTION
FREQUENCY
Body
Use a clean cloth and a non-abrasive cleaner to clean the
stainless steel body of the griddle. Wipe the polished areas
with a soft cloth
Daily
Back &
Side Splashes
Wipe the polished areas with a soft cloth. Thoroughly clean.
Wipe with clean, warm, mildly, soapy water then wipe splash-
es with damp cloth
Daily
Controls
Unit should be turned off when not in use. It is recommended
that the unit be disconnected from the gas supply by closing
the main gas valve. Use a clean cloth to wipe any down con-
trols and/or knobs
Daily
Griddle
Plate
Clean surface with wire brush or metal spatula. Clean the
griddle surface thoroughly. If necessary, use a griddle stone
wire brush or steel wool on the surface. Rub with the grain of
the metal while the griddle is still warm. A mild soap may be
used on the plate surface to help clean it. Remove all soap
and debris thorough with a clean, damp cloth. The plate
should then be covered with a thin film of oil to prevent rust-
ing. Clean stainless surfaces with a damp cloth and polish
with a soft dry cloth.
After
each
use
Weekly
Catch Tray
Once the unit has cooled, remove the catch tray and dis-
card the wastes, debris and crumbs. CAUTION: if the catch
tray is permitted to fill too high, debris is likely to accumu-
late under the unit. The catch tray/drawer is removed by
pulling forward. USE CAUTION WHEN REMOVING!
Per use or
at least Daily
Regulator
Make sure the vent opening is open and not blocked in any
way. Failure to do so will cause variations in pressure. Your
unit will not function as well and it could shorten the life of
the product
Monthly
!!
!!
CAUTION
10
www.brikaequipment.ca
CLEANING INSTRUCTIONS