Briggs & Stratton 6404, Инструкция по установке и эксплуатации

Страница: 27 / 180

27
Menu
MENU
ENTER THE MENU (VIEW SETTINGS)
PRESS TO CONFIRM SELECTION WHEN PROGRAMMING.
ESCAPE (EXIT) RETURN TO LAST MENU ITEM
RIGHT ARROW
TOGGLE THROUGH MENU OPTIONS
SETTING SYSTEM PARAMETERS
LEFT ARROW
TOGGLE THROUGH MENU OPTIONS
SETTING SYSTEM PARAMETERS
MANUAL MODE
USED TO MANUALLY START THE GENERATOR. PRESS AND HOLD
BUTTON TO START THE GENERATOR.
OFF
TURNS OFF RUNNING GENERATOR, PREVENTS UNIT FROM STARTING,
AND RESETS ANY DETECTED FAULTS.
AUTOMATIC MODE
NORMAL OPERATING POSITION. PRESS AND HOLD BUTTON TO PUT
UNIT INTO
AUTOMATIC MODE. IF A UTILITY POWER OUTAGE IS SENSED, THE
SYSTEM WILL START THE GENERATOR. WHEN UTILITY POWER
IS RESTORED, AUTO LETS THE ENGINE STABILIZE INTERNAL
TEMPERATURES, SHUTS OFF THE GENERATOR, AND WAITS FOR THE
NEXT UTILITY POWER OUTAGE.
The following chart shows the icons for the buttons that control the system control panel.
The following chart describes key sequences for accessing different programming modes;
GENERAL
SET-UP PRESS AND HOLD [ARROW LEFT AND ARROW RIGHT] UNTIL
“GENERAL SET-UP” IS DISPLAYED TO ENTER THE PROGRAM
MODE.
ADVANCED
SETTINGS PRESS AND HOLD [ARROW LEFT, ARROW RIGHT AND ESC] UNTIL
“ADVANCED SETTINGS” IS DISPLAYED OR PRESS AND HOLD
EITHER [ARROW LEFT, ARROW RIGHT OR ESC] BUTTON UNTIL
“++1++” IS DISPLAYED ON THE DIGITAL DISPLAY. NEXT PRESS AND
HOLD A DIFFERENT KEY [ARROW LEFT, ARROW RIGHT OR ESC]
BUTTON UNTIL “++2++” IS DISPLAYED. FINALLY, PRESS AND HOLD
THE REMAINING BUTTON NOT SELECTED [ARROW LEFT, ARROW
RIGHT OR ESC] UNTIL “ADVANCED SETTINGS” IS DISPLAYED.
WIRELESS
LINK MODE PRESS AND HOLD [MENU AND ESC] FOR THREE SECONDS TO
ENTER THE WIRELESS LINKING MODE. (ONLY APPLICABLE ON
SOME MODELS).
Not for
Reproduction