Briggs & Stratton 1695906, Руководство оператора

Страница: 10 / 60

10
FEATURES AND CONTROLS
SNOWTHROWER CONTROLS
A. Speed Select Lever — Allows the operator to use one of six
(6) forward and two (2) reverse speeds (see Figure 2). To shift,
move speed select lever to desired position.
NOTICE: Do not move speed select lever while Traction
Control is engaged. This may result in severe damage to
the drive system.
B. Auger Control Lever — Used to engage and disengage the
auger and impeller. To engage push down, to disengage release.
C. Chute Rotation Switch — Used to rotate the discharge chute
to the left or right.
D. Chute Deflector Switch — Used to control the angle of the
chute deflector (up or down).
E. Free-Hand™ Control — After engaging the traction control (left
hand) and auger control (right hand), allows the operator to
release the auger control lever to use the other controls.
F. Easy-Turn™ Traction Control — When engaged, allows the
operator to release the left traction wheel, but allows the right
wheel to continue driving for easy turning.
G. Traction Control Lever — Used to propel snowthrower forward
or reverse. Push down to engage, release to disengage.
H. Clean-Out Tool — Used to remove snow and debris from the
discharge chute and the auger housing.
Snowthrower Controls Figure 2
B
A
C
G
1 2
I
H
E
D
J
L
K
F
www.briggspowerproducts.ca
Not
for
Reproduction