35-DVRS31NB(N)-2
26
NOTE: Do not remove any components while the appliance is hot.
Door Removal
Surround Install & Removal
The surround is held in place by clip buttons (two at the
top, two at the bottom). Grasp the surround by the sides
and pull, releasing the clips.
Release the bottom latches located on the left and right bottom of
door. To release pull forward then press down.
Remove the door by pulling the bottom out to 30 degrees and
lift upward to release the 2 latches at the top of the door.
CAUTION: Beware the glass does not drop out.
Firmly grip the door and glass when removing door assembly.
Surround Clip Mounting
Install surround clip (
pictured below)
to the top
of the outer surround in pre
-
punched holes.
Repeat for the bottom clips
Mounting Holes
Mounting Holes
Top Heat Deflector
Fig 25
-
A
Fig 25
-
B
Fig 25
-
C
Fig 25
-
D
Fig 25
-
E
Fig 25
-
F
W A R N I N G
Any alteration to the product that causes carbon or soot build up that results in any
damage or requires cleaning is not the responsibility of the manufacturer.