65
SERVER TEST
is used to aid troubleshooting server connections, the
feature is used to determine which port is not functioning. See
Server Test Results Figure 299
ABOUT
displays the window shown in
. This will show the
current MDR-Dashboard and MDR Server version.
Additional information of which server ports are used will be shown in the
ABOUT
window when the MDR-Dashboard is logged in as server mode. See
CHECK FOR UPDATES
is used to check for software updates. This will
redirect you to webpage (brigade-electronics.com/MDR-Software-Update).
Here you will be able to find new MDR-Dashboard software releases.
SYSTEM SETTINGS
are shown in
This area is used to configure the following:
➢
Set Path for Snapshots
➢
Map Mode
➢
Language
➢
Speed Unit
➢
Temperature Unit
➢
Automatically Switch to Main Stream
– tick this box to use the main
stream (higher quality) or leave unticked to use the sub-stream. This is
not supported for the MDR 400 Series.
➢
Loop Video Playback
– this will play the entire selected video on repeat.
This feature can be used for HDD or directory playback
➢
Auto-logout
➢
Auto-Close Video
➢
Skip Time Duration(seconds)
– this enables user to use the key board
left and right keys to skip forward and backward under Local Flies
Playback. The value defines how many seconds to skip at one time.
➢
Total Alarms Shown
– shows the historical alarms and events in the
real-time alarm log area. By default, it is 200.
➢
Alarm Period Shown
– shows the alarms and events for the past time
range setting in the real-time alarm log area. By default, it is 30 minutes.
Server Test Figure 298
Server Test Results Figure 299
➢
Enable Dual Monitor Map View (Server Mode
– Live view only) – this
will expand the map to a separate window. This helps when monitoring
multiple online vehicles.
➢
Automatically Open Historic Live View Channels (Server Mode
– Live
View only)
➢
Set Path for Live View Recordings
Logout Screen Figure 300
About Figure 301
System Settings Figure 302
