Enter the address of the iSNS server with which your iSCSI Gateway is registered, then click
OK
.
The Microsoft iSCSI Initiator will now query the iSNS server and perform discoveries on registered
target portals.
Click on the
Targets
tab. The discovered devices should now be listed.
In this example two iSCSI targets have been discovered. The first device is the tape drive, and the
second is the media changer. If no devices are displayed, check that the settings used to perform
the discovery, including CHAP settings, are correct. Then return to
Targets
tab and click
Refresh
.
If still no devices are displayed, check network cables and that the iSCSI Gateway is operational.
Connecting to a Target
To connect to one of the displayed iSCSI targets, click on its list entry, then click the
Log on
button.
In this example we have chosen the first target. The following window should appear:
66
