iSCSI Target Configuration
The iSCSI Target page of the web interface, allows the administrator to configure mutual CHAP
authorisation, and TCP ports of each iSCSI target interface.
From the Home page of the web interface, select the
iSCSI Target
icon under the
Devices and
Protocols
section.
The web interface will then display the following:
Authorisation (CHAP)
CHAP is an authentication scheme used by servers to validate the identity of clients, and vice versa.
When CHAP is enabled, the initiator must send the correct username and target password to gain
access to the iSCSI target of the Gateway.
The initiator secret is provided to allow iSCSI mutual CHAP. If mutual CHAP is selected on the
initiator, the iSCSI Bridge will authenticate itself with the initiator using the initiator secret.
To enable CHAP, select the
CHAP enabled
checkbox and enter the following details:
Username
This is the same name as specified on the initiating host.
30
