Initiator Secret
This is the password defined on the initiating host. This must be 12 to 16 characters
long. This should only be entered if mutual CHAP is enabled on the initiating host.
Target Secret
This is the password that must be entered on the initiating host. This must be 12 to
16 characters long.
Network Interfaces
The table under the Network Interfaces section displays the interfaces and IP addresses the iSCSI
target is presenting devices on.
The iSCSI protocol officially uses two main TCP ports: 3260 and 860. For each iSCSI target
interface, you can choose to enable either one these TCP ports, or both, or disable iSCSI on the
interface completely, from the
Configured TCP Port(s)
dropdown.
iSCSI Sessions
Each initiator will open at least one session with each target device it is logged on to. The iSCSI
Sessions page in the web interface of the EFC102200 can be used to review these connections.
From the Home screen, select the
iSCSI Sessions
icon under the
Devices and Protocols
section.
The web interface will then display the following:
31
