Brew-Boss® V2.06 Operation Manual
Install the valve assembly to the Tri-Clamp ferrule on the bottom front of the kettle (below the Brew-
Boss Logo) using the clear silicone gasket between the valve and the ferrule on the kettle. Make
certain the gasket is centered in the grooves and does not get pinched while installing the clamp and
tightening. Hands tighten the clamp; do not use tools to tighten the clamp.
Kettle Valve Assembly Installed on Kettle (shown with VALUE nipple)
Option: Install Lifting Device
Wet saturated grains can get very heavy (each 9 lbs of grain absorbs about 1 gallon of water) and when
they are hot, can be difficult to work with.
When removing the wet grains, it is desirable to let the grains hang above the kettle for a while to allow
the trapped wort in the grains to drain into the kettle.
If you are using the BIAB mesh bag style system, you'll need a lifting device like the one shown below.
Simply tie the end around the BIAB bag with a slip knot. These locking lifts are nice as they self lock
as you pull them up, so the bag won't drop uncontrolled if you accidentally let go of the rope. We offer
Page 14
