Breville BIR300, Инструкция пользователя

Страница: 15 / 20

15
Once the iron has shut itself off, the Auto
Off Indicator Light will blink to indicate that
the iron has switched off.
To reactivate the iron, simply move the iron.
The heating Indicator Light will switch on
when the iron is reaching the temperature
selected on the Temperature dial.
!
SAFETY AUTO-OFF IS
DESIGNED AS A SAFETY
FEATURE ONLY. IRONS SHOULD
NOT BE LEFT SWITCHED ON
DELIBERATELY WHILE
UNATTENDED. IF SAFETY
AUTO-OFF HAS ACTIVATED AND
NO FURTHER IRONING IS
REQUIRED, WE RECOMMEND
THAT THE IRON IS SWITCHED
OFF AT THE POWER OUTLET
AND UNPLUGGED.
ANTI-DRIP FEATURE
The iron is equipped with an Anti-drip
function. The iron will automatically stop
steaming when the temperature is too low.
This prevents water from dripping out of
the soleplate.
When this function activates you will hear a
‘click’ sound. It is safe and it will not harm
the performance of the iron.
AFTER EACH USE
Step 1.
Set the Steam Selector dial to the
dRY position and turn the Temperature
dial to minimum.
Step 2.
Switch the power off at the power outlet
and disconnect the power cord from the
power outlet.
Step 3.
Open the Water Filling Cap and over a sink
or a bucket, invert the iron and shake to
empty the water tank.
Step 4.
Stand the iron in an upright position and
allow to cool.
Step 5.
Store the iron on its heel rest (and not
resting on the soleplate). To save space,
the power cord may be easily wound
around the storage facility.
NOTE:
Always store the iron standing on
its heel with all the water emptied
from the water tank. If the iron is
stored with the soleplate facing
downwards, corrosion and staining
of the soleplate (from even the
smallest amount of moisture left
after the tank is emptied).
OPERATING YOUR BREVILLE JETSTEAM IRON