Breville BIR300, Инструкция пользователя

Страница: 11 / 20

11
Step 4.
Select the temperature setting required
by rotating the Temperature dial so that
the desired setting is aligned with the
Temperature Indicator.
Step 5.
The heating Indicator Light will illuminate,
indicating that the iron is heating up. When
the Indicator Light goes out, the iron has
reached the selected temperature and
is ready for use. The light will cycle on
and off as the thermostat maintains the
selected temperature.
NOTE:
The heating Indicator Light is sealed
in a plastic compartment, and does
not come into contact with the water
in the water tank.
!
THE JETSTEAM IRON
INCORPORATES A THERMAL
SAFETY FUSE TO PROTECT THE
IRON FROM OVER-HEATING.
HOWEVER THE IRON SHOULD
NOT BE LEFT UNATTENDED
WHILE IT IS CONNECTED TO
THE POWER OUTLET. SPECIAL
CARE SHOULD ALWAYS BE
TAKEN WHEN THERE ARE
CHILDREN IN THE HOME/
VICINITY OF THE IRON.
BEFORE FIRST USE
Remove any promotional material from
the iron.
Remove any sticker or protective cover
from the soleplate.
When operating the iron for the first time,
iron on an old piece of fabric to ensure
that the soleplate and water tank are
completely clean.
When the iron is used for the first time
some vapour may be emitted. After a short
while however, this will cease. The vapour
is due to the initial heating of the materials
used in the iron. It is safe and will not harm
the performance of the iron.
NOTE:
As an important part of our quality
control process, your iron has been
individually tested. As a result,
you may notice a small amount of
condensation or water droplets on
the inside of the water tank. There is
no need for concern.
SETTING THE TEMPERATURE
Step 1.
Before commencing ironing, sort all items
to be ironed according to the fabrics
requiring the coolest temperatures first and
then work through to the fabrics requiring
the higher temperatures.
Step 2.
Stand the iron on its heel and ensure that
the Temperature dial is turned to minimum.
Step 3.
Plug the power cord into a 230V or 240V
power outlet and turn the power on.
OPERATING YOUR BREVILLE JETSTEAM IRON