27
CONTROL PANEL MESSAGES – ERROR DETECTION
When the
Start
button is pressed to begin the program and there is a problem relating to the
sensor, the bread machine will beep twice and then flash an error message specific to the
problem.
There are 4 different messages.
If the error messages
EEE
or
HHH
appear in the Display Window contact your nearest
authorized Breville Service Centre (Refer Page 33).
CONTROL PANEL MESSAGES
26
ERROR MESSAGE
PROBLEM
CORRECTION
E01
If attempting to use
Press Stop to reset.
the bread machine
Open the lid and remove
shortly after a loaf
the bread pan to cool.
has been baked, its
Always allow the bread
interior will still be
machine sufficient time
warm, i.e. the sensor
to cool before using again.
temperature will still
be above 40ºC.
E00
The ambient temperature
Ensure the room temperature
is too cold.
is above 10°C.